Now you are ready to turn on the MacBook. As soon as you hit the power button, you must hold down the Option or Alt key. This will produce a display offering the option to boot to all boot-able devices connected to the MacBook. There will likely be only one: Select it, and then click the arrow button to continue to boot from this device.
Once your Mac has booted to the desktop, you'll probably see a message asking if you wish to initialize a device.http://mastervirt.lvlup.gr/petite-colere-roman-ecritures-french-edition.php
Resize Partitions in Mac OS X with Disk Utility
If this does appear, you will choose to Initialize, but if it doesn't you will want to launch Disk Utility, which can be found in the Utilities folder inside the Applications folder. Either way, you should be greeted by a display looking something like this:. Select the new hard drive listed at the top of the left-hand column, and then select the Partition tab. Choose the number of partitions you want from the drop-down menu currently stating Current as 1 Partition. Next, you will want to rename your drive to something other than Untitled. Using the Options button at the bottom, make sure that GUID Partition Table is selected this is the new standard by which Intel Mac hard drives can be found as boot-able devices, which you will want as it will be your main hard drive and click OK.
Now click Partition, and when the dialogue box appears, click Partition again. Wait a few seconds while you watch the blue progress bar flash from left to right, and then notice that the name you selected for your drive is now displayed below the manufacturers name in the left-hand column. You now have yourself a usable, formatted, partitioned drive.
Resizing a Mac Drive Partition with Disk Utility
Easy, huh? Now you can close Disk Utility. Using the same settings as before only in reverse , you can restore the backup you are currently using to the new drive. You will want to copy from your external hard drive to MacBook HD which will also now appear on your desktop. Once the transfer is complete, you're ready to go! Reboot your MacBook once again, holding the Option or Alt key to choose the internal hard drive.
Click the arrow button to boot from it. You're done! Start by turning on the MacBook and inserting Restore Disk 1.
This will allow you to boot to all boot-able devices connected to the MacBook. If it doesn't, try holding the power button until the machine turns off, and power it back on again holding the Option key. Once the machine has booted to the Restore Disk, you can choose your language. After the next screen appears, you will notice a familiar looking Menu Bar across the top of the screen. Under the Utilities menu, you should see the Disk Utility application.
Selecting this option will allow you to follow the same instructions for performing this procedure as if you were booted to a backup drive.
Once you have partitioned your drive, you can close Disk Utility. Your new hard drive will now be fully recognized by your MacBook.
2. Thunderbolt RAID Systems
Continue to walk through the on-screen instructions for installing Mac OS X If you want to really show off, you can click the Customize button in the bottom of the window part way through this process to choose not to install certain bundled applications, language packs you won't use, and so on.
Deselect all of them to slim down the space required to install Mac OS X This is the real benefit of the fresh installation over using SuperDuper! What should you do with your old hard drive? Consider purchasing a hard drive enclosure to use it as an external USB hard drive. After you receive the enclosure, follow the instructions to install your old hard drive.
Resize a disk image using Disk Utility on Mac
The resulting product will look a lot like an external hard drive. Just connect the USB cable to your Mac and you'll be able to access your old hard drive! It's a great way to keep it out of the recycling bin. The place to learn about your Mac. Tips and tutorials for novices and experts. Last updated: Making Your Backup Before you take your factory-installed hard drive out of your MacBook, think about what will go on the new one. Why Do I Need a Backup? What Software Do I Use?
Choosing a Backup Drive There are many factors to consider when choosing a backup hard drive. Launch SuperDuper!
- remote access mac same network;
- ipad bluetooth remote for mac;
- How to Upgrade Retina MacBook Pro SSD Storage: Inch: ihigawekumir.tk.
- How to Add More Storage to Your MacBook: 6 Methods That Work!
- Popular Topics;
You can find it in your Applications folder. You will want to copy Macintosh HD your current internal hard drive as shown on your desktop to your external hard drive which will also appear on your desktop, now that it's plugged in and switched on. Using the default option of "Backup - all files" will automatically create a boot-able backup, one which you can later boot to as if it were your internal drive.
This is great if you want to test something, have a fully cloned system to revert to should the worst happen , or in this case, to copy to your new drive without loosing a single setting. Click the Copy Now button, and then click Copy in the next dialogue box.
Sit back and wait. Once the copy is complete, you will have what's known as a full boot-able backup. Now you can do whatever you want to your internal hard drive - your data is safety stored on your new backup drive! Just to make sure, it's always worth booting to that drive and checking that everything went according to plan.
It only takes a minute, and it's better to do it now rather than find it didn't work. Restart your Mac. While it starts, hold the Option Alt key until a display appears. This asks you to choose a hard drive to boot from.
How to Resize a Mac Volume With Disk Utility
Clicking on your backup, and then clicking on the arrow below it, will tell your Mac to boot to the backup. You'll know that you have successfully booted to your backup rather than your internal drive because the backup will now appear at the top of your Finder window side panel, like so: Now that you have everything backed up, it's time to install your new hard drive!
Use a coin to turn the lock slot to the unlock position. This will allow you to remove the battery. Inside the bay, there is a small L-shaped bracket running down the left and far edges. This is removable with a Phillips 0 screwdriver. Unscrew the three screws along the far longer face. Don't be fooled: Once unscrewed, the plate should pull out very easily.
Now you can see the memory RAM modules behind the long side of the plate we will leave these for the moment and a small white tab on the left behind the shorted side of the L-Shaped bracket. Pull the tab to release the hard drive from its slot and pull it free from the computer. When you compare the new and original drives, you will notice that there are 4 small pegs 2 on each of the longer sides of the original hard drive. These perform two functions.
First, they hold the EMI Electromagnetic Interference shield on, which is the silver shield covering the delicate underside of the drive the one you don't want to touch. Second, they guide the drive into its bay and hold it in place. You can then also restore your partition from a clone using Disk Utility as well. Email yours to mac macworld. Launch Disk Utility.
Select the disk, not the volume, in the left-hand lists of disks. Click the Partitions button. You can now delete other partitions select and click the - button , and type in the new size of your main partition in its Size field. IDG Disk Utility lets you resize partitions, but it can be hard to predict whether this will require erasing the partition or not until you click Apply.
Related increase mac hard drive size
Copyright 2019 - All Right Reserved